Vehicle speed display, enable/disable
Indicated on display
Fig 1: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (1 Of 7)
- Press buttons -7- and -7- to select adaptation "channel 77".
NOTE:
False entries can be corrected by pressing the "C" button.
- Press -Q- button to confirm input.
Indicated on display (example only):
Fig 2: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (2 Of 7)
Top row of display indicates adaptation channel selected and system adaptation value (configuration) currently stored.
- 0 = Vehicle speed display disabled
- 1 = Vehicle speed display enabled
- Press --> button.
Indicated on display (example only):
Fig 3: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (3 Of 7)
- Enter desired adaptation value (e.g.: 00001 or 00000)
- 00001 = enables vehicle speed display
- 00000 = disables vehicle speed display
- Press -Q- button to confirm input.
Indicated on display
Fig 4: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (4 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 5: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (5 Of 7)
- Press -Q- button to confirm input.
Indicated on display
Fig 6: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (6 Of 7)
- Press --> button.
Indicated on display
Fig 7: Identifying Scan Tool Display - Adaptation: Vehicle Speed Display, Enable/Disable, Radio (7 Of 7)
- Press buttons -0- and -6- to select "End Output" function 06.
- Press --> button.