Transport Mode, activate/deactivate
NOTE:
Radios in which "Transport-Mode" has been activated will indicate "TRANSPORT" on radio display.
Indicated on display:
- Press buttons -9- and -9- to select adaptation channel 99.
NOTE:
False entries can be corrected by pressing the "C" button.
- Press -Q- button to confirm input.
Indicated on display (example only):
Top row of display indicates adaptation channel selected and system adaptation value (configuration) currently stored.
- 0 = Transport-Mode deactivated
- 1 = Transport-Mode activated
- Press --> button.
Indicated on display (example only):
- Enter desired adaptation value (e.g.: 00001 or 00000)
- 00000 = disable Transport-Mode
- 00001 = enable Transport-Mode
- Press -Q- button to confirm input.
Indicated on display:
- Press -Q- button to confirm input.
Indicated on display:
- Press -Q- button to confirm input.
Indicated on display:
- Press --> button.
Indicated on display:
- Press buttons -0- and -6- to select "End Output" function 06.
- Press --> button.