End Output (function 06)

• Press buttons -0- and -6- to select "End Output", function 06.

Indicated on display

Fig 1: Identifying Scan Tool Display - End Output (Function 06) (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

• Press -Q- button to confirm input.

Indicated on display

Fig 2: Identifying Scan Tool Display - End Output (Function 06) (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

• Switch off ignition.
• Disconnect diagnostic harness connectors from the Data Link Connector (DLC).