Work step 8: Diagnostic of operational readiness of oxygen sensors behind TWC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Engine at idle

Indicated on Display

Fig 1: VAG1551 Scan Tool Display - Generating Readiness Code: Diagnostic Of Operational Readiness Of Oxygen Sensors Behind TWC (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0-, -3- and -6- to select display group number "036" and press -Q- button to confirm input.

Indicated on display

Fig 2: VAG1551 Scan Tool Display - Generating Readiness Code: Diagnostic Of Operational Readiness Of Oxygen Sensors Behind TWC (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Check specified values in display fields 2 and 4.

DISPLAY GROUP 036: OPERATIONAL READINESS OF OXYGEN SENSORS BEHIND TWC (BANK 1 AND BANK 2)

	Display fields
	1	2	3	4
Display group 036: Operational readiness of oxygen sensors behind TWC (Bank 1 and Bank 2)
Display	x.xxx Volt	Test ON	x.xxx Volt	Test ON
Indicated	Voltage of oxygen sensor behind TWC, bank 1	Diagnostic condition	Voltage of oxygen sensor behind TWC, bank 2	Diagnostic condition
Work range	0.000V to 1.000 Volt	Test OFF Test ON B2-S2 OK B2-S2 not OK	0.000V to 1.000Volt	Test OFF Test ON B2-S2 OK B2-S2 not OK
Value	less than 0.4 Volt or greater than 0.5 Volt	B1-S2 OK	less than 0.4 Volt or greater than 0.5 Volt	B2-S2 OK
Note		IF "B1-S2 not OK" is displayed: Check DTC Memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING .		If "B2-S2 not OK" is displayed: Check DTC memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING .

If the specified value in display field 2 of "B1-S2 OK" and in display field 4 "B2-S2 OK" is reached:

Press -C- button.