Work step 10: Diagnostic of oxygen sensor aging behind catalytic converter
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
- Increase engine speed until exhaust temperature of 250 °C is reached in display field 2.
Indicated on display
Fig 1: VAG1551 Scan Tool Display - Generating Readiness Code: Diagnostic Of Oxygen Sensor Aging Behind Catalytic Converter (1 Of 2)
- Press buttons -0-, -4- and -3- to select display group number "043" and confirm input with -Q- button.
Indicated on display
Fig 2: VAG1551 Scan Tool Display - Generating Readiness Code: Diagnostic Of Oxygen Sensor Aging Behind Catalytic Converter (2 Of 2)
- Check specified value in display field 4.
DISPLAY GROUP 043: OXYGEN SENSOR AGING OXYGEN SENSOR BEHIND TWC (BANK 1)
| Display fields | ||||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| Display group 043: Oxygen sensor aging oxygen sensor behind TWC (Bank 1) | ||||
| Display | xxx/RPM | xxx °C | x.xxx V | Test ON |
| Indicated | Engine speed (RPM) | Catalyst temperature | Voltage of oxygen sensor behind TWC Bank 1 |
Diagnostic condition |
| Work range | 0 to 6800/RPM | 70 to 850 °C | 0.000 to 1.000 Volt | Test OFF Test ON B1-S2 OK B1-S2 not OK |
| Value | 650 to 720/RPM | approx. 250 °C | 0.000 to 1.000 Volt | B1-S2 OK |
| Note | If "B1-S2 not OK" is displayed: Check DTC memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING . | |||
If specified value of "B1-S2 OK" is reached:
- Press -C- button.
- Press buttons -0-, -4- and -4- to select display group number "044" and confirm input with -Q- button.
DISPLAY GROUP 044: OXYGEN SENSOR AGING OXYGEN SENSOR BEHIND TWC (BANK 2)
| Display fields | ||||
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | |
| Display group 044: Oxygen sensor aging oxygen sensor behind TWC (Bank 2) | ||||
| Display | xxxx/RPM | xxx °C | x.xxx Volt | Test ON |
| Indicated | Engine speed (RPM) | Catalyst temperature | Voltage of oxygen sensor behind TWC Bank 2 |
Diagnostic condition |
| Work range | 0 to 6800/RPM | 70 to 850 °C | 0.000 to 1.000 Volt | Test OFF Test ON B2-S2 OK B2-S2 not OK |
| Value | 650 to 720/RPM | approx. 250 °C | 0.000 to 1.000 Volt | B2-S2 OK |
| Note | If "B2-S2 not OK" is displayed: Check DTC memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING . | |||
If specified value of "B2-S2 OK" is reached:
- Press -C- button.