Adaptation of Kilometer-/mile display

With this function the kilometer/miles display can be activated when the instrument cluster is replaced.

NOTE:

Adaptation is only possible for an instrument cluster showing less than 100 km.
Adaptation for each instrument cluster can be done only once.
Only a higher adaptation value can be entered.
After confirming an entered value it cannot be corrected. If the value is wrong the instrument cluster must be replaced.
Also in countries with odometers in miles, the adaptation must be made in km. It is necessary to convert miles into km (miles 1.609 = kilometers).
When replacing the instrument cluster. see INSTRUMENT CLUSTER, VALUES TO BE ENTERED WHEN REPLACING .

Select function:

Press C button.
Indicated on display.

Fig 1: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (1 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press buttons 1 and 1.
Indicated on display.

Fig 2: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (2 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 3: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (3 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Enter code 13861.
Indicated on display.

Fig 4: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (4 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 5: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (5 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press buttons 1 and 0.
Indicated on display.

Fig 6: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (6 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 7: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (7 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press buttons 0 and 9.
Press Q button to confirm input.
Indicated on display.

Fig 8: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (8 Of 14)
Courtesy of AUDI OF AMERICA, INC.

NOTE: Only a direct entry with the VAG 1551 Scan Tool (ST) is possible.
Pressing the button advances the program sequence.
Indicated on display.

Fig 9: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (9 Of 14)
Courtesy of AUDI OF AMERICA, INC.

Enter adaptation value with VAG 1551 Scan Tool (ST).

Example:

Kilometer reading = 89627 km.
Enter value: 0 8 9 6 3

ENTERING KILOMETER VALUES: EXAMPLE

0	8	9	6	3	Entered value
X					Hundred thousands: 100000 - 655350 km
	X				Ten thousands: 10000 - 90000 km
		X			Thousands: 1000 - 9000 km
			X		Hundreds: 100 - 900 km
				X	Tens: 10 - 90 km
					Singles: round up to the next ten

Indicated on display.

Fig 10: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (10 Of 14)

Courtesy of AUDI OF AMERICA, INC.

Press Q button to confirm input.
Indicated on display.

Fig 11: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (11 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 12: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (12 Of 14)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 13: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (13 Of 14)
Courtesy of AUDI OF AMERICA, INC.
End adaptation by pressing the button.
Indicated on display.

Fig 14: Scan Tool Display - Adaptation Of Kilometer-/Mile Display (14 Of 14)
Courtesy of AUDI OF AMERICA, INC.