OBD functions

List of selectable functions:

1. 02 - Check DTC memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING (SCAN TOOL FUNCTION 02) .
2. 03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (DTM) (SCAN TOOL FUNCTION 03) .
3. 04 - Basic Setting. See BASIC SETTING (SCAN TOOL FUNCTION 04) .
4. 05 - Erase DTC Memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, ERASING (SCAN TOOL FUNCTION 05) .
5. 06 - End Output. See END OUTPUT (SCAN TOOL FUNCTION 06) .
6. 07 - Code Control Module. See CONTROL MODULE, CODING (SCAN TOOL FUNCTION 07) .
7. 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (SCAN TOOL FUNCTION 08) .