Coolant, Draining & Filling: Draining
NOTE:
Catch coolant for proper disposal.
- Remove noise insulation.
- position catch basin VAG 1306 under engine compartment.
- Open expansion tank cap.
- Drain coolant at radiator, pushing auxiliary hose onto drain petcock (arrow) if necessary.
- Disconnect upper hose to radiator -1- at radiator and coolant manifold, and lay aside.
- T-piece to expansion tank remains connected.
- Remove intake air hose -2-.
- Remove union (arrows).
- Remove O-ring and thermostat, allowing remaining coolant to drain.