LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1987 >> Coupe Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Front Caliper >> Reassembly

Front Caliper: Reassembly

  1. Use all parts supplied in repair kit. Coat piston(s), cylinder bore(s) and new seal(s) with brake paste. Fit piston seal(s) into cylinder. Slide dust seal(s) onto piston(s). Slowly insert piston(s) into bore.
  2. Seat inner lip of dust seal in groove on cylinder housing. Open bleeder and push piston into bore as far as possible. Fit outer lip of dust seal into piston groove.
Fig 1: Exploded View of Rear Caliper Assembly (Quattro Models)
G50634Courtesy of AUDI OF AMERICA, INC.
scientia non olet · About LEMON Manuals