LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1987 >> 4000 CS Quattro >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Oil Temperature Gauge >> 4000 Series

4000 Series

  1. Check battery and voltage stabilizer for proper voltage. Remove center console. Start engine. Connect Tester (VW 1301) between gauge and ground.
  2. With dial set to 422, gauge should read 60°. With dial set to 146, gauge should read 90°. With dial set at 53, gauge should read 120°. If gauge needle is within tolerance ranges, oil temperature sender is defective.
  3. If gauge needle is outside tolerance ranges, oil temperature gauge is defective. Keep tester connected for a minimum of one minute to allow gauge to reach checking range.
scientia non olet · About LEMON Manuals