LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1983 >> Coupe Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Disc Brake Pads >> Installation

Rear Disc Brake Pads: Installation

  1. Using an Allen wrench, turn piston in clockwise rotation while pushing it into caliper bore. Install brake pads in carrier.
  2. Install caliper assembly, and tighten mounting bolts. Pump brake pedal several times to seat pads. Check parking brake adjustment, and bleed hydraulic system if necessary.
scientia non olet · About LEMON Manuals