LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1982 >> 4000 Base, 2D Sedan >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4000 4-Cylinder >> Valves >> Valve Stem Oil Seals >> Removal

Valve Stem Oil Seals: Removal

  1. Remove camshaft, valve adjusting disc and cam follower. Remove spark plug of cylinder to be serviced. Place piston of cylinder to be serviced at bottom of its stroke.
  2. Install air hose and adapter (VW 653/3) in spark plug hole and apply air pressure. Do not remove air pressure until valve spring components are reassembled.
  3. Using valve spring compressor (VW 541), compress valve spring and remove keepers, retainer and springs. Lift seal off valve stem.
scientia non olet · About LEMON Manuals