LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1982 >> 4000 Base, 2D Sedan >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4000 4-Cylinder >> Pistons, Pins & Rings >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head, oil pan and oil pump. Place piston to be removed at bottom of cylinder and cover with a cloth to collect metal cuttings. Using a ridge reamer, remove any ridge or deposit from upper end of cylinder bore.
  2. Before removing piston and rod from engine, ensure rod and rod cap are marked for cylinder identification. Remove rod cap and carefully push piston and rod out top of cylinder. Install rod cap on rod from which removed.
scientia non olet · About LEMON Manuals