LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1982 >> 4000 Base, 2D Sedan >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4000 4-Cylinder >> Camshaft >> Camshaft Oil Seal >> Removal

Camshaft Oil Seal: Removal

  1. Remove upper timing belt cover. Position No. 1 piston on TDC at end of compression stroke. Loosen tensioner pulley to relieve tension on timing belt.
  2. Remove camshaft sprocket with timing belt attached. Do not allow timing belt to separate from sprocket. Remove Woodruff key. Using seal remover tool (10-221), remove oil seal.
scientia non olet · About LEMON Manuals