LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1982 >> 4000 Base, 2D Sedan >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4000 4-Cylinder >> Camshaft >> Camshaft Oil Seal >> Installation

Camshaft Oil Seal: Installation

  1. Install protective sleeve of seal installing tool (10-203) over camshaft. Coat seal lips with oil. Push seal over sleeve and into position.
  2. Using seal installing tool (10-203), press seal into recess until flush. Install remaining components in reverse order of removal. Check that valve timing is correct.
scientia non olet · About LEMON Manuals