Cylinder Head Gasket: Remove & Replace
WARNING: This page is about the Alliance Base, Automatic, which is a different variant/trim than selected.
Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 1.4L Eng | 6.6 | 5.3 | B | |
| Additional Procedure: CYLINDER HEAD GASKET: Remove & Replace: | ||||
| Where Air Cond interferes add | 0.3 | 0.3 | B | |
| Where Pwr Strg interferes add | 0.2 | 0.2 | B | |
| Combination Procedure: CYLINDER HEAD: Disassemble & Assemble: | ||||
| D&A for Sublet machine operations. Use Necessary Clock Time. | B | |||