Clutch E

DISASSEMBLY 

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

1. Place the E-Clutch (2) in a suitable press.
2. Using (special tool #8901A, Pressing Tool) (1), compress the E-Clutch piston (2) enough to remove the snap ring (3).

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the E-Clutch piston support (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the E-Clutch piston (1).

   Courtesy of CHRYSLER GROUP, LLC

   NOTE:

   Pay attention to the orientation of the plates.

5. Remove the wave plate (1) and the friction and steel plates (2).

   Courtesy of CHRYSLER GROUP, LLC

6. Remove the backing plate (1).

   Courtesy of CHRYSLER GROUP, LLC

7. Remove the belleville spring (1) from the E-Clutch hub.

   Courtesy of CHRYSLER GROUP, LLC

8. Remove the E-Clutch seal (1) and O-ring (2).

ASSEMBLY 

Courtesy of CHRYSLER GROUP, LLC

1. Install the E-Clutch seal (1) and O-ring (2).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the belleville spring (2) into the E-Clutch hub (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Install the backing plate (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Install the six friction and six steel plates (2), and install the wave plate (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Install the E-Clutch piston (1) onto the hub.

   Courtesy of CHRYSLER GROUP, LLC

6. Install the E-Clutch piston support (1).

   Courtesy of CHRYSLER GROUP, LLC

7. Place the E-Clutch in a suitable arbor press.
8. Using (special tool #8901A, Pressing Tool) (1) compress the E-Clutch (2) enough to install the snap ring (3).