LEMON Manuals: Even more car manuals for everyone
Home >> Alfa Romeo >> 2021 >> Stelvio Ti >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (2.9L - Engine (Service Information)) >> Technical Specifications >> Specifications

Technical Specifications: Specifications

WARNING: This page is about a different variant/trim than selected.
ENGINE TYPE

  2.9L
Position in vehicle Front
Orientation Longitudinal
Number of cylinders 6
Cylinder position V6 by 90°
Fuel Gas
Camshaft configuration 4 OHC (2 for each bank)
ENGINE DATA

  2.9L
Bore (mm) 86.5
Stroke (mm) 82.0
Total displacement (cm3) 2891
Maximum power (kW EC) 375
Maximum power (HP EC) 510
Maximum power (RPM) 6500
Maximum torque (Nm EC) 600
Maximum torque (kgm EC) 61
Maximum torque (RPM) 2500
Idle speed - at a temperature of > 50° C (122° F) (RPM/1') 800 ± 50
Compression ratio 9.3:1
ENGINE OIL PRESSURE

4.1 bar ± 0.3 bar (59.4 psi ± 4.35 psi) 4000 RPM ± 100 RPM Oil Temperature 90° C ± 5° C (194° F ± 41° F)
1.5 bar ± 0.3 bar (21.7 psi ± 4.35 psi) @ 2500 RPM ± 100 RPM Oil Temperature 80° C ± 5° C (176° F ± 41° F)
VALVES

    2.9L V6
Left Cylinder Head Right Cylinder Head
Intake Opening - 25° (35°) - 25° (35°)
Closing - 62.9° (- 2.9°) - 65.3° (- 5.3°)
Exhaust Opening - 58.2° (- 8.2°) - 59.8° (- 9.8°)
Closing - 15° (35°) - 15° (35°)