Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. Turn the ignition on.
2. With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
3. With the scan tool, read the Amplifier (AMP) DTCs.

   Is the DTC active?

   Yes 

   • Replace the AMP Module in accordance with the Service information. Refer to AMPLIFIER, REMOVAL AND INSTALLATION .
   • Perform the Body VERIFICATION TEST. Refer to STANDARD PROCEDURE .

   No 

   • Perform the Body VERIFICATION TEST. Refer to STANDARD PROCEDURE .
   • Test complete.