Electric Brake Booster Connector for Inputs and Outputs
WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
Electric Brake Booster Inputs and Outputs for 26P Connector (female terminals)
| Terminal number | Terminal sign | Description |
|---|---|---|
| 1 | GND | Ground for the electric brake booster |
| 2 | +B BOOSTER MTR | Power source for the motor |
| 3 | Not used | --- |
| 4 | Not used | |
| 5 | PTS GND | Ground for the brake pedal stroke sensor |
| 6 | Not used | --- |
| 7 | Not used | |
| 8 | Not used | |
| 9 | Not used | |
| 10 | Not used | |
| 11 | PTS VS | Power source for the brake pedal stroke sensor |
| 12 | F-CAN B_L | F-CAN communication circuit |
| 13 | FL DOOR SW | Detects driver's door switch signal |
| 14 | Not used | --- |
| 15 | Not used | |
| 16 | Not used | |
| 17 | Not used | |
| 18 | F-CAN A_L | F-CAN communication circuit |
| 19 | F-CAN B_H | F-CAN communication circuit |
| 20 | Not used | --- |
| 21 | PTS2 | Detects brake pedal stroke sensor signal |
| 22 | PTS1 | Detects brake pedal stroke sensor signal |
| 23 | Not used | --- |
| 24 | IG1 OPTION4 | Power source for activating the system |
| 25 | Not used | --- |
| 26 | F-CAN A_H | F-CAN communication circuit |