Brake Booster (K24Z7) (2013 2014 2015): Removal

Brake Booster - Remove

Courtesy of HONDA, U.S.A., INC.

1. Remove the clips (A).

2. Remove the wire harness connector (B).

3. Remove the air cleaner bracket (C).

Courtesy of HONDA, U.S.A., INC.

4. Disconnect the brake booster vacuum hose (A) from the brake booster (B).

5. Remove the brake lines (C) from the brake line clamp (D).

Courtesy of HONDA, U.S.A., INC.

6. Remove the lock pin (A).

7. Remove the clevis pin (B).

8. Remove the brake booster mounting nuts (C).

Courtesy of HONDA, U.S.A., INC.

9. Remove the brake booster (A) from the engine compartment.

NOTE:

Be careful not to damage the brake booster mounting surfaces and the threads on the booster studs.
Be careful not to bend or damage the brake lines.