Power Windows System - Control/Function (2013 2014 2015)
Basic Operation
- Manual Up/Down Function
The 1-step operation of the power window switch moves the window upwardly or downwardly. This is available during the vehicle is turned to ON mode and Lock (OFF) mode operation (only in driver side).
- Auto Up/Down Function (only in driver side)
The 2-step operation of the power switch moves the window upwardly or downwardly. This is available during the vehicle is turned to ON mode and Lock (OFF) mode operation (only in driver side).
Auto Reverse Power Window Function
When some object is detected during the AUTO UP operation, the window stops closing and reverses about 70 mm (2.8 in). If the window is less than halfway opened (about 220 mm), it will reverse to half open position (about 220 mm). In the manual operation, this function is active only during the key-off operation. This function is activated based on the calculation of the rotation speed and load change of the motor's pulse A.
Vehicle OFF Operation
For about 10 minutes after the vehicle is turned to the OFF (LOCK) mode, the window's open/close operation with the power window switches is available.
| Vehicle OFF Operation Start Condition |
|
|
| Vehicle OFF Operation Cancel Condition | Timer | Vehicle ON mode -> OFF (LOCK) mode and past 10 minutes |
| Door | Type A*
|
|
Type B*
|
||
*: Control is different depending on the specifications.
Keyless/Key Cylinder Operation
By turning the key a second time and holding it with the key inserted into the driver's door key cylinder, the windows close (or open) (turning the key clockwise to open, turning the key counterclockwise to close). The windows stop moving when the key is returned to the neutral position.
By pressing and holding the LOCK (or UNLOCK) button of the remote a second time, the windows close (or open). The windows stop moving when the LOCK (or UNLOCK) button is released.