Audio-Navigation System DTC: 2706
DTC 2706 : Gyro Diag: ECU Temp°
C
NOTE:
- Check the vehicle battery condition first .
- This navigation DTC sets when there is a problem with the internal gyro (the Yaw Sensor icon is red in the System Link), and indicates the navigation ECU temperature when the DTC is detected.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information .
- Check any official Honda service website for more service information about the navigation system.
- Problem verification
-1. Clear the hard error codes .
-2. Press the engine start/stop button to select the OFF mode and then select the ON mode.
-3. Check for hard error codes .
Is DTC 2706 indicated?
YES
Replace the audio-navigation unit .
NO
Intermittent failure, the system is OK at this time.