Cable Reel Inspection

Before disconnecting the SRS related connector, do the 12 volt battery terminal disconnection procedure and wait for at least 3 minutes.

Test Procedure

Preparation
- Driver's airbag first inflator 2P connector: disconnected
- Driver's airbag second inflator 2P connector: disconnected
- Cable reel connector B (4P) : disconnected

Procedure

Perform the inspection according to the following table.


		(Disconnected) Driver's airbag first inflator 2P connector female terminals	(Disconnected) Driver's airbag second inflator 2P connector female terminals
	IG Mode	Courtesy of HONDA, U.S.A., INC.	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
LA1+, LA2+ shorted wire to wire inspection	OFF			There is more than 1 MΩ
LA1-, LA2- shorted wire to wire inspection	OFF			There is more than 1 MΩ

Results