Cable Reel Inspection

NOTE: Before disconnecting the SRS related connector, do the 12 volt battery terminal disconnection procedure and wait for at least 3 minutes.

Test Procedure

Preparation
- Driver's airbag first inflator 2P connector: disconnected
- Cable reel connector B (4P) : disconnected

Procedure

Perform the inspection according to the following table.


		(Disconnected) Driver's airbag first inflator 2P connector female terminals
	IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
LA1+, LA1- shorted wire to wire inspection	OFF		There is more than 1 MΩ

Results