Left Rear Seat Belt Tensioner Inspection
Before disconnecting the SRS related connector, do the 12 volt battery terminal disconnection procedure and wait for at least 3 minutes.
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
Left rear seat belt tensioner circuit inspection
- Preparation
- Left rear seat belt tensioner 2P connector: disconnected
- Procedure
- Perform the confirmation procedure.
- Normal Conditions
- DTC B0073-11 is not indicated.
Results
- If it is normal, there is a problem with the left rear seat belt tensioner.
- If it is abnormal, there is a problem with the related components.