Low Fuel Indicator Test: Test

How to use this Service Information .

1. Low Fuel Indicator - Test 1

   ■ Procedure/Specifications 

   • Do the gauge control module self-diagnostic function .

   Normal Conditions 

   Specifications
   The low fuel indicator flashes.

   ■ Result 

   • If it is abnormal, replace the gauge control module .
2. Low Fuel Indicator - Test 2

   ■ Preconditions 

   • "Low Fuel Indicator - Test 1" is completed and has tested normal.
   • HDS Connected

   ■ Procedure/Specifications 

   • Check for body electrical system DTCs.

   Normal Conditions 

   Specifications
   No DTC

   ■ Result 

   • If it is abnormal, do the indicated DTC's troubleshooting.
   • If it is normal, do the fuel gauge sending unit test .