DTC: U3000-49(Gauge Control Module)

DTC U3000-49  : ECU Internal Circuit Malfunction

DTC (Gauge Control Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Press the engine start/stop button to select the OFF mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-49 ECU Internal Circuit Malfunction

   Is DTC U3000-49 indicated?

   YES 

   Replace the gauge control module .

   NO 

   Intermittent failure, the system is OK at this time.