LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2020 >> TLX SH-AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Gauges - Testing & Troubleshooting >> Connector For Inputs And Outputs >> Parking And Back-Up Sensor Control Unit Connector For Inputs And Outputs (2015-17)

Parking And Back-Up Sensor Control Unit Connector For Inputs And Outputs (2015-17)

GHH162187Courtesy of HONDA, U.S.A., INC.
Terminal number Terminal name Description Signal
1 IG1 METER IG1 power source With vehicle in ON mode: about battery voltage
2 BOF SIDE R BOF SIDE R signal - - -
3 SOF SIDE R SOF SIDE R signal - - -
4 Not used - - - - - -
5 Not used - - - - - -
6 SOF SIDE L SOF SIDE L signal - - -
7 Not used - - - - - -
8 Not used - - - - - -
9 GND Ground for parking and back-up sensor control unit Less than 0.2 V at all times
10 B-CAN_L Communication line - - -
11 E1 SIDE R E1 SIDE R signal - - -
12 GND Ground for parking and back-up sensor control unit - - -
13 C/SNSR SW Detects parking and back-up sensor switch signal With vehicle in ON mode and parking and back-up sensor switch ON: about battery voltage

With parking and back-up sensor switch OFF: less than 0.2 V

14 BOR SIDE L BOR SIDE L signal - - -
15 SOR SIDE R SOR SIDE R signal - - -
16 SOR CTR R SOR CTR R signal - - -
17 SOR CTR L SOR CTR L signal - - -
18 SOR SIDE L SOR SIDE L signal - - -
19 Not used - - - - - -
20 Not used - - - - - -
21 Not used - - - - - -
22 B-CAN_H Communication line - - -
23 E2 SIDE L E2 SIDE L signal - - -
24 C/SNSR IND Outputs parking and back-up sensor switch indicator signal Parking and back-up sensor switch indicator OFF: about battery voltage

Parking and back-up sensor switch indicator ON: less than 0.2 V