LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2020 >> ILX >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Engine Control System - Diagnostics (P2185 - U0301) (Except Hybrid)) >> DTC Troubleshooting >> DTC P2450 (1.5 L Engine)

DTC P2450 (1.5 L Engine)

WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.

DTC P2450  : EVAP System Purge Line Non-return Valve A Stuck Open

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC Description Confirmed DTC Pending DTC
P2450 EVAP System Purge Line Non-return Valve A Stuck Open    

DTC (PGM-FI)

  1. Problem verification

    -1. Turn the vehicle to the ON mode.

    -2. Clear the DTC with the HDS.

    -3. Select the EVAP TEST in the Function Test, then select FUNCTION TEST with the HDS.

    EVAP TEST - FUNCTION TEST

    Check for Pending or Confirmed DTCs with the HDS.

    DTC Description Confirmed DTC Pending DTC
    P2450 EVAP System Purge Line Non-return Valve A Stuck Open    

    Is DTC P2450 indicated?

    YES 

    Replace the EVAP canister purge valve .

    NO 

    Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the EVAP canister purge valve and the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .