DTC P0441 (1.5 L Engine)
WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0441 : EVAP System Purge Flow Malfunction
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If DTC P0441 is indicated alone, do the troubleshooting for DTC P04DF and P04F1 using the on-board snapshot for P0441.
- If DTC P04F0, P04F1, P145D, and P0441 are stored at the same time, check for a poor connection, a blockage, or damage at the EVAP canister purge line between the EVAP canister purge valve and the EVAP canister. Also check for a stuck closed EVAP canister purge valve.
- If any of the DTCs listed below are indicated at the same time as DTC P0441, troubleshoot those DTCs first, then recheck for P0441.
P04DF, P04F0, P04F1: EVAP system purge flow
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P0441 EVAP System Purge Flow Malfunction |
DTC (PGM-FI)
- DTC check
-1. Turn the vehicle to the ON mode.
-2. Select the EVAP TEST in the Function Test, then select the FUNCTION TEST with the HDS.
EVAP TEST - FUNCTION TEST
-3. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P0441 EVAP System Purge Flow Malfunction P04DF EVAP System High Purge Flow Detected P04F0 EVAP System Incorrect Purge Flow Detected P04F1 EVAP System Low Purge Flow Detected Are DTC P04DF, P04F0, or P04F1 and P0441 indicated at the same time?
YES
Go to the indicated DTC's troubleshooting.
NO
Go to the troubleshooting for DTC P04DF , P04F0 , and DTC P04F1 .