Windshield Wiper Control Unit/Motor Connector for Inputs and Outputs
WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
Windshield Wiper Control Unit/Motor 6P Connector (female terminals)
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 1 | GND | Ground for windshield wiper control unit/motor | Less than 0.2 V at all times |
| 2 | +B WIPER | +B power source | About battery voltage at all times |
| 3 | BACK UP (WIPER) | Detects BACK UP (WIPER) line | With wiper HI or LO operation: about battery voltage If none of the above conditions are met: less than 0.2 V |
| 4 | LIN (FR WIPER) | Communication line | --- |
| 5 | Not used | --- | --- |
| 6 | Not used | --- | --- |