DTC U0416-68 (Electric Brake Booster Control Unit)
DTC U0416-68 : VSA System Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| U0416-68 VSA System Malfunction |
DTC (Electric brake booster)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode, then wait 5 seconds or more.
NOTE: Do not open and close the driver's door.
-4. Turn the vehicle to the ON mode.
-5. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame U0416-68 VSA System Malfunction Is DTC U0416-68 indicated?
YES
Go to step 2.
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.
- VSA system DTC check
-1. Check for DTCs with the HDS.
DTC Description DTC DTC (VSA)
Are any DTCs indicated?
YES
Go to indicated DTC's troubleshooting .
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.