Automatic Lighting Control Unit-Sensor Connector for Inputs and Outputs
WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
Automatic Lighting Control Unit-Sensor 5P Connector (female terminals)
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 1 | B-CAN_H | Communication line | --- |
| 2 | B-CAN_L | Communication line | --- |
| 3 | GND | Ground for automatic lighting control unit-sensor | Less than 0.2 V at all times |
| 4 | +B BACK UP *1 | +B power source | About battery voltage at all times |
| +B BACKUP2 SUB *2 | +B power source | About battery voltage at all times | |
| 5 | H/L ON SW | Outputs H/L ON SW signal | With combination light switch is in ON position: less than 0.2 V With combination light switch is in AUTO position and the conditions for the headlight to be ON: less than 0.2 V if none of the above conditions are met: about battery voltage |
*1: Without auto idle stop system
*2: With auto idle stop system