LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2020 >> ILX >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Supplemental Restraint System - DTC Diagnostics (B0001 - B0052) (Except Hybrid)) >> How To Information >> How to Troubleshoot the SRS >> How to Clear DTCs

How to Clear DTCs

WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Make sure the 12 volt battery is fully charged before you begin.

1. Turn the vehicle to the OFF (LOCK) mode, then wait for 10 seconds.

2. Connect the HDS to the data link connector (DLC)

3. Clear the DTC(s) by following the screen prompts on the HDS.

4. Turn the vehicle to the OFF (LOCK) mode, then wait for 10 seconds.