DTC B1080
WARNING: This page is about a different car, the 2022 Honda Accord, 2021 Honda Accord, 2020 Honda Accord, 2019 Honda Accord, and 2018 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
DTC B1080 : Power Supply Circuit (IG1 line) Input Error for Relay Control Module and MICU (Body Control Module)
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .
| DTC Description | DTC |
|---|---|
| B1080 Power supply circuit (IG1 line) input error for relay control module and MICU (body control module) |
DTC (Relay Control Module)
- Problem verification
-1. Clear the DTCs with the HDS.
-2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
-3. Wait for at least 6 seconds.
-4. Check for DTCs with the HDS.
DTC Description DTC B1080 Power supply circuit (IG1 line) input error for relay control module and MICU (body control module) Is DTC B1080 indicated?
YES
Repair an open or high resistance in the IG1 METER wire.
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.