Paddle Shifter Removal and Installation(A/T) (2013 2014 2015): Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repair or service.

1. Paddle Shifter - Install

   Paddle Shifter + (Upshift Switch)  Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC. Paddle Shifter - (Downshift Switch)  Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.

   1. Install the paddle shifter + (upshift switch) (A) or the paddle shifter - (downshift switch) (B). 2. Connect the paddle shifter + (upshift switch) connector (C) or the paddle shifter - (downshift switch) connector (D).

2. Steering Wheel Rear Cover - Install

   Courtesy of HONDA, U.S.A., INC.

   1. Install the steering wheel rear cover (A).

3. Steering Wheel - Install

   1. Install the steering wheel .

4. VSA Sensor Neutral Position - Memorize

   1. Do the VSA sensor neutral position memorization .

5. Steering Angle Sensor Neutral Position - Clear

   1. Do the steering angle sensor neutral position clear .