Audio System (2019 2020 2021 2022): Version
This screen shows the current version information for the audio system.
- Model: For this model, the field should begin with TX6.
- Coverage: Displays the destination of the audio unit.
- ERATO and BUμCom are all for factory use.
- Download is for factory use only. Only perform downloading if instructed. Failure to do so may result in permanent damage to the audio unit.
If you instructed to Download (install) an older software version into the audio unit, do the following:
1. Insert the update USB memory in which the software is installed.
2. Select DownLoad in the Version screen.
3. If you are loading older software into the audio unit's memory, a Confirmation screen appears warning you that the version being uploaded is older than the currently loaded software. Select Yes on the Confirmation screen.
4. The audio system reboots. Check that the center display shows the information properly.