Forced Completing of In Line Diag and Linking

Follow these steps to prevent the screen from appearing in the future:

1. While displaying the In Line Diag screen, press and hold the INFO, SETTINGS, and BACK buttons at the same time for at least 3 seconds. The Select Diagnosis Items screen appears.

2. While displaying the Select Diagnosis Items menu screen, press and hold the SETTINGS button until the In line Diag Setting screen appears.

Courtesy of HONDA, U.S.A., INC.

3. Set the In Line Diag Setting to Complete, then select the Return icon twice to exit the diagnostic mode. The In Line Diag should not appear again.