Forced Completing of In Line Diag and Linking

Follow these steps to prevent the screen from appearing in the future:

1. While displaying the In Line Diag screen, press and hold the MENU button, the AUDIO button, and the BACK button for about 3 seconds. The Select Diagnosis Items screen appears.

2. While displaying the Select Diagnosis Items menu screen, press and hold the AUDIO button until the In line Diag Setting screen appears.

Courtesy of HONDA, U.S.A., INC.

3. Set the In Line Diag Setting to Complete, then select the Return icon twice to exit the diagnostic mode. The In Line Diag should not appear again.