DTC C1120-96

DTC C1120-96  : Electric Parking Brake Switch Malfunction

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC is detected when operating the electric parking brake switch continuously for more than 20 seconds.
• Check that electric parking brake/automatic brake hold switch is free of dirt and other foreign particles.

DTC (Electric parking brake)

1. Problem verification

   - 1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   - 3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   - 4. Wait 20 seconds or more.

   - 5. Check for DTCs with the HDS.

   DTC Description	DTC
   C1120-96 Electric Parking Brake Switch Malfunction

   Is DTC C1120-96 indicated?

   YES 

   The failure is duplicated. Check the electric parking brake switch .

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .