LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2019 >> MDX Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges / Meter - Service Information (Except Hybrid) >> Removal and Installation >> Paddle Shifter Removal and Installation (2014 2015) >> Removal and Installation

Removal and Installation

SRS components are located in this area. Review the SRS component locations - Refer to: SRS Component Location Index (2014 2015 2016) and the precautions and procedures before doing repair or service.

  1. Steering Wheel - Remove
  2. Steering Wheel Rear Cover - Remove
    GHH322119Courtesy of HONDA, U.S.A., INC.
  3. Paddle Shifter + (Upshift Switch) - Remove
    GHH322120Courtesy of HONDA, U.S.A., INC.
    1. Disconnect the paddle shifter + (upshift switch) connector (A).

    2. Remove the paddle shifter + (upshift switch) (B).

  4. Paddle Shifter - (Downshift Switch) - Remove
    GHH322121Courtesy of HONDA, U.S.A., INC.
    1. Disconnect the paddle shifter - (downshift switch) connector (A).

    2. Remove the paddle shifter - (downshift switch) (B).

  5. All Removed Parts - Install
    1. Install the parts in the reverse order of removal.