Electric Parking Brake Control Unit Connector for Inputs and Outputs (2016 2017 2018 2019 2020)
Electric Parking Brake Control Unit Inputs and Outputs for 30P Connector
 Courtesy of HONDA, U.S.A., INC.
|
| Terminal number |
Wire color |
Terminal sign |
Description |
Signal |
| 1 |
WHT |
+B EPB L |
Power source for the electric parking brake control unit (Power source for the left electric parking brake actuator) |
Battery voltage (about 12 V) at all times |
| 2 |
ORN |
EPB L ACT+ |
Drives the left electric parking brake actuator motor |
--- |
| 3 |
YEL |
+B EPB R |
Power source for the electric parking brake control unit (Power source for the right electric parking brake actuator) |
Battery voltage (about 12 V) at all times |
| 4 |
BLU |
EPB R ACT+ |
Drives the right electric parking brake actuator motor |
--- |
| 5 |
BLK |
GND |
Ground for the electric parking brake control unit |
Continuity to ground |
| 6 |
GRN |
EPB L ACT- |
Drives the left electric parking brake actuator motor |
--- |
| 7 |
BLK |
GND |
Ground for the electric parking brake control unit |
Continuity to ground |
| 8 |
RED |
EPB R ACT- |
Drives the right electric parking brake actuator motor |
--- |
| 9 |
Not used |
Not used |
--- |
| 10 |
BLU |
SW2 |
Detects electric parking brake switch signal |
| 11 |
TAN |
SW1 |
Detects electric parking brake switch signal |
| 12 |
LT BLU |
PARK LAMP |
Sends electric parking brake indicator signal |
| 13 |
Not used |
Not used |
--- |
| 14 |
Not used |
Not used |
| 15 |
Not used |
Not used |
| 16 |
PUR |
ACC/ACC RLY CL+ |
Power source for electric parking brake control unit (accessory mode) |
With vehicle in ACCESSORY mode: battery voltage (about 12V) |
| 17 |
RED |
PARKING BRAKE SW |
Sends parking brake status signal |
--- |
| 18 |
Not used |
Not used |
--- |
| 19 |
Not used |
Not used |
| 20 |
Not used |
Not used |
| 21 |
Not used |
Not used |
| 22 |
Not used |
Not used |
| 23 |
Not used |
Not used |
| Terminal number |
Wire color |
Terminal sign |
Description |
Signal |
| 24 |
YEL |
IG1 DR1 |
Power source for activating the system |
With vehicle in ON mode: battery voltage (about 12V) |
| 25 |
Not used |
Not used |
--- |
--- |
| 26 |
Not used |
Not used |
| 27 |
BRN |
SW4 |
Detects electric parking brake switch signal |
| 28 |
YEL |
SW3 |
Detects electric parking brake switch signal |
| 29 |
GRY |
F-CAN B_L |
F-CAN communication circuit |
| 30 |
PNK |
F-CAN B_H |
F-CAN communication circuit |