DTC P2583-54

DTC P2583-54  : Millimeter Wave Radar Aiming Incomplete

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• If the millimeter wave radar is removed or replaced, you must aim it, otherwise DTC P2583-54 is stored even if the system is OK.

DTC (IDAS)

1. Millimeter wave radar check (aiming)

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Aim the millimeter wave radar .

   -4. Turn the vehicle to the OFF (LOCK) mode, then the ON mode.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   P2583-54 Millimeter Wave Radar Aiming Incomplete

   Is P2583-54 indicated?

   YES 

   Check for loose or poor connections. If OK, replace the millimeter wave radar .

   NO 

   Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.