DTC U3000-51 (CAN Gateway)

DTC U3000-51  : CAN Gateway Programming Error

NOTE:  Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information .

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 CAN Gateway Programming Error

   Is DTC U3000-51 indicated?

   YES 

   Reprogram the CAN gateway .

   NO 

   Intermittent failure, the system is OK at this time.