DTC U3000-49 (CAN Gateway)

DTC U3000-49  : CAN Gateway Internal Failure

NOTE:  Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information .

DTC (CAN gateway)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-49 CAN Gateway Internal Failure

   Is DTC U3000-49 indicated?

   YES 

   Replace the CAN gateway .

   NO 

   Intermittent failure, the system is OK at this time.