LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2017 >> TLX Base, 2.4L Eng >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges - Testing & Troubleshooting >> Testing >> Dashlights Brightness Control Switch Test >> Test

Dashlights Brightness Control Switch Test: Test

  1. Meter Visor - Remove
  2. Dashlights Brightness Control Switch - Test
    GHH201393GHH201394Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.
    GHH201393GHH201394Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.
    		 1. Check the dashlights brightness control switch (A) according to the table.
    NOTE:
    • When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
    • Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

    2. If the continuity is not as specified, replace the dashlights brightness control switch .
  3. All Removed Parts - Install
    1. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals