DTC B1FB3
DTC B1FB3 : Left rear heater not heating (second row seat)
| DTC Description | DTC |
|---|---|
| B1FB3 Left rear heater not heating (second row seat) |
DTC (Second Row Seat Heater Control Unit)
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2014 2015 2016) or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2017 2018 2019 2020) .
- The seat heater control unit does not turn on the seat heater until the seat core temperature is 85 degrees or less. Make sure the seat core temperature is below 85 degrees before troubleshooting.
- Problem verification
-1. Clear the DTCs with the HDS.
- 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
- 3. Check for DTCs with the HDS.
DTC Description DTC B1FB3 Left rear heater not heating (second row seat) Is DTC B1FB3 indicated?
YES
Go to step 2.
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- DTC check
-1. Check for DTCs with the HDS.
DTC Description DTC B1FA0 Left rear heater thermistor circuit open (second row seat) B1FA1 Left rear heater thermistor circuit short (second row seat) B1FAB Left rear heater current abnormal high (second row seat) B1FAC Left rear heater current abnormal low (second row seat) Are DTCs B1FA0, B1FA1, B1FAB, and/or B1FAC indicated?
YES
Go to DTC B1FA0 troubleshooting .
YES
Go to DTC B1FA1 troubleshooting .
YES
Go to DTC B1FAB troubleshooting .
YES
Go to DTC B1FAC troubleshooting .
NO
Replace the left second row seat cushion heater - Refer to: Seat Heater Replacement (2017 2018 2019 2020), or Seat Heater Replacement(Seat Heaters), or Seat Heater Replacement - Ventilated Seats(Ventilated Seats) .