DTC U3000-49
DTC U3000-49 : ECU internal circuit malfunction
| DTC Description | DTC |
|---|---|
| U3000-49 ECU internal circuit malfunction |
DTC (Gauge Control Module)
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2014 2015 2016) or Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2017 2018 2019 2020)
- Problem verification
- 1. Clear the DTCs with the HDS.
- 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
- 3. Check for DTCs with the HDS.
DTC Description DTC U3000-49 ECU internal circuit malfunction Is DTC U3000-49 indicated?
YES
Replace the gauge control module .
NO
Intermittent failure, the system is OK at this time.