DTC U0127 (Gauge Control Module) (2014 2015)
DTC U0127 : Gauge control module lost communication with TPMS control unit
| DTC Description | DTC |
|---|---|
| U0127 Gauge control module lost communication with TPMS control unit |
DTC (Gauge Control Module)
NOTE:
- If you have any loss of communication DTCs for the PCM, troubleshoot those DTCs first.
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks (2014 2015 2016)
- Problem verification
- 1. Clear the DTCs with the HDS.
- 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
- 3. Wait for at least 6 seconds.
- 4. Check for DTCs with the HDS.
DTC Description DTC U0127 Gauge control module lost communication with TPMS control unit Is DTC U0122 indicated?
YES
Go to step 2.
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- DTC check
- 1. Check for DTCs with the HDS.
DTC Description DTC DTC (Backup Control Unit)
DTC Description DTC DTC (Keyless Access Control Unit)
DTC Description DTC DTC (Power Control Unit)
Are any other DTC also indicated?
YES
Go to the indicated DTCs troubleshooting.
NO